Open planning before placement makes it easy to clean up clutter.There are the following: () The brake of the elevator should be regularly inspected to see if its clearance is appropriate, as well as some other aspects, in order to ensure its flexibility and reliability in use. In addition, on the friction surface of the brake, it is necessary to check for any dirt, and if any it should be cleaned in a timely manner. () For the part of the moving boarding bridge, it should be carried out in accordance with the specified requirements, and it should be comprehensive and sufficient without any omissions. However, the amount of oil should not be too much, as too much can also cause problems.The length of the electric hydraulic boarding bridge is generally about meters, and the bearing weight varies depending on the tonnage. It is mm for tons, m for tons, and m for tons. It is very suitable for placement on the ground in open spaces.Encyclopedic knowledge,DraktenMobile folding boarding bridge,The length of the electric hydraulic boarding bridge is generally about meters, and the bearing weight varies depending on the tonnage. It is mm for tons, m for tons, and m for tons. It is very suitable for placement on the ground in open spaces.After the boarding bridge work is completed, all parts should be scrubbed and cleaned. When not working, the workbench should be lowered to a low position.The precautions during the use of hydraulic boarding bridges are hoped to be helpful to you.
There are three movable boards on both sides of the air conditioning board,DraktenRetractable boarding bridge,conduct.Keep the hydraulic boarding bridge system clean: regularly replace the oil and filter. Good hydraulic oil contains various additives that can prevent oil deterioration or blockage of system components. However these additives will lose their effectiveness after a period of time. Therefore, the oil should be replaced regularly to ensure that the additives are effective. The filter can only absorb a limited number of dirt particles and other impurities from the oil. Replace the filter according to the recommended cycle to keep the system clean.During the excavation process of the foundation pit of the simple boarding bridge, collision of the support structure should be prevented, and changes in the soil wall should be paid attention to at all times. If any abnormal phenomena such as cracks are found, construction must be suspended and reported to the superior for handling.Drakten,Shake the handle to raise the boarding bridge to the height of the container.During use, close attention should be paid to the condition of the equipment, and if there are any problems, the use should be stopped immediately.Install a m high protective railing around the foundation pit of the simple boarding bridge with a distance of no less than m from the protective railing to the foundation pit. The mobile boarding bridge only requires a single person to operate,DraktenMechanical fixed boarding bridge, without the need for power supply, and can achieve safe and fast loading and unloading of goods. Mobile boarding bridges are widely used in cargo platforms and mobile loading and unloading sites without loading and unloading equipment. They are auxiliary equipment for cargo loading and unloading that is used in conjunction with forklifts. The sequence of earthwork excavation must comply with design conditions and follow' Trenching support, support first and then excavation, layered excavation, no overbreak&rquote; The principle of.
Wholesale of communication equipment 2024-04-25 12:24:45 support 0 | be opposed to 0
Excluding fire fighting equipment 2024-04-25 13:35:14 support 0 | be opposed to 0
Processing of kitchen equipment 2024-04-25 12:41:28 support 0 | be opposed to 0
709HP180518493 2024-04-25 07:06:25 support 0 | be opposed to 0