PuertoPadreReinforced wooden doorHow to promote industrialization quickly

Good flooring should choose good materials, good materials should be natural, it is not. If the density is too high the better. In fact, its water absorption and expansion rate is also high,PuertoPadreIs the floor leather or wooden, which is easy to cause size change and lead to floor deformation.Secondly we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification', because the acquisition of these honors must refine the results of an enterprise&#;s operation.Then look at the qualityPuertoPadre,First, it is easy to clean. Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.The general specification and model of general floor is cm×cm, the specification and model of high-capacity floor can reach cm×cm, with a total area of times that of the general wooden floor.The floor is generally made of common materials such as red sandalwood and Huanghua pear wood. The corner material is discarded and made of a key part of the whole tree. It mainly shows the air. The road construction has an endless sense of flexion and extension and three-dimensional feeling.Shop edit voice

Good wear resistance and stabilityTherefore, we should first find out where they are born. Only by manipulating the insect source can we reasonably kill insects. Sticker method: stick the same wood grain paper on the front and back of the board.Development Curriculum,PuertoPadreIs floor leather harmful,Fifth, smell with your nose is not protected by the environment.sound insulationHow to prevent cracks in wooden floors.

Easy to clean: medical treatment is simple, bright as a new mouth, no stains, easy to clean.The surface paint of solid wood composite floor is very good, with good wear resistance, without excessive vitality maintenance.According to statistics, the solid wood composite floor prepared for the sales market will not be waxed within years, and the wind color of automobile coating will also be maintained.This is obviously compared with the maintenance of solid wood flooring.Latest consultation, The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.How to maintain multi-layer solid wood floor II: phased wax maintenance method wax maintenance it is recommended that the family multi-layer solid wood floor should be maintained with wax every quarter. When the wax is ventilated indoors, when the temperature difference is large in rainy days, the wax should be wiped along the direction of the ground wax texture when applying. All the wax should not be poured on the floor. After the feet are cleaned, it will take hours to use.Many consumers believe that the insects on the wood floor are undoubtedly due to the unqualified quality of the wood floor. Obviously, the insects on the wood floor are due to the difficult problem of the wood floor processing technology, but the insects growing out are not necessarily born on the wood floor. Call a deer a horse: the commercial family pretends that the low-priced tree species are high-priced tree species which is purely to deceive consumers by using the blind spot of consumers&#; knowledge.PuertoPadre,SPC floor has a thickness of mm-mm,PuertoPadreWhat waterproof board, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.Laminate flooring is suitable for meeting rooms, offices, high-definition cleanliness laboratories, etc. it can also be used for the ground decoration of medium and high-grade hotels, restaurants and civil houses.Although laminate floor has moisture-proof layer, it should not be used in wet places such as bathroom and toilet.The first is the type of raw material.When purchasing solid wood multi-layer wood floor, you should pay attention to whether the floor is the same material and whether the surface has defects such as crack, rot, skin clip, moth eaten, environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.