TiheiHydraulic elevator structureIn which areas shine

Double column electric elevator: a newly designed new generation product, made entirely of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, a large platform area, excellent stability flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used in factories hotels, buildings, shopping malls, stations, sports venues, etc. The three column elevator can be used for the installation and maintenance of power lines, lighting appliances, elevated pipelines, and other high-altitude operations, as well as for single person work such as high-altitude cleaning. The three sets of masts support the operation platform to lift synchronously, and the support structure is the same as the single masts platform. It has a super large load capacity and excellent work stability. Integral elevating four column electric elevator: it is refined from high-strength aluminum profiles. Due to the high strength of profiles, it adopts four mast column structure, which has excellent stability, flexible operation, large load capacity, large platform area and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. Minimize the deflection of the lifting platform. This elevator is widely used in factories, hotels, buildings, shopping malls, stations, airports, sports venues, etc. It can be used for the installation and maintenance of power lines, lighting appliances, elevated pipelines, and other high-altitude operations for single person work such as high-altitude cleaning.A type of elevator equipment consisting of a walking mechanism, hydraulic mechanism, electric mechanism, and support mechanism. The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.Tihei,Compact structure,TiheiElectric mobile hydraulic lifting platform, allowing access to narrow passages and elevators.Elevator: The fully automatic high-altitude work platform has a sturdy structure, which minimizes the deflection of the high-altitude work platform. Equipped with automatic walking function, it can walk in different working states without the need for external power supply. The handle can walk at an adjustable speed, with flexible movement, and easy lifting. Only one person can complete forward, backward, turning, fast, slow walking, and up and down movements,With the strict control of high-altitude construction by the country, safety production is becoming increasingly important. As a highHydraulic lifting platform products are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, posts and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight, self-propelled walking, electric starting, self supporting legs, large working area, and especially the ability to cross obstacles for high-altitude operations.A type of elevator equipment consisting of a walking mechanism, hydraulic mechanism, electric mechanism, and support mechanism. The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve, made entirely of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, a large platform area, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used in factories, hotels, buildings, shopping malls stations, sports venues, etc. The three column elevator can be used for the installation and maintenance of power lines, lighting appliances,TiheiPrice of hydraulic lifting platform, elevated pipelines, and other high-altitude operations, as well as for single person work such as high-altitude cleaning. The three sets of masts support the operation platform to lift synchronously, and the support structure is the same as the single masts platform. It has a super large load capacity and excellent work stability. Integral elevating four column electric elevator: it is refined from high-strength aluminum profiles. Due to the high strength of profiles, which has excellent stability, flexible operation, large load capacity, large platform area and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. Minimize the deflection of the lifting platform. This elevator is widely used in factories, hotels, buildings shopping malls, stations, airports, sports venues, etc. It can be used for the installation and maintenance of power lines, lighting appliances, elevated pipelines, and other high-altitude operations for single person work such as high-altitude cleaning.The correct maintenance method can effectively extend the use of the lifting platform.Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, maintenance effect and whether the equipment still has problems after the maintenance is completed.quality,TiheiHydraulic lifting unloading platform equipment,Firstly the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the elevator, the power must be disconnected, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the elevator. If it is necessary for maintenance work, after the maintenance is completed, the grounding wire must be connected before the power test can be conducted. When replacing elevator spare parts, it is necessary to ensure that the spare parts are availableEquipped with a manual descent valve for emergency descent in case of power outage. Year-end maintenance and inspection of hydraulic and pipeline connections. If the pipeline is damaged it should be replaced immediately; When there is looseness in the connection part, tighten the pipe joint.

What are the advantages of elevators being loved and widely used by both new and old customers? What are the advantages of elevators being loved and widely used by both new and old customers; The elevator is made of high-strength tested material, which is lightweight and suitable for handling and storage. It also has four polyurethane casters that can be moved freely, making it easy to work in various locations without worrying about crushing the ground. The elevator structure is stable; The component connection strength is very high and stable, and the support mechanism design is very scientific. The overall structure is safe and stable, making people feel at ease. Strong applicability; Leg height adjustment, able to be used based on steps, stairs, and complex terrain; By using polyurethane casters, damage to marble, and lawns can be avoided; Able to enter and exit narrow spaces (such as elevators, doors, etc.), construct and operate; Various combinations and beautiful appearance. The elevator requires no maintenance and is rust resistant; The elevator does not require maintenance. If it is not used for a long time, it only needs to be lifted and lowered once every half a month. All its components have undergone anti oxidation treatment, do not rust, and are also resistant to chemical corrosion.Inspection basis,In modern society, there are many high-altitude work projects, and their danger is not only related to construction management and personnel quality, but also to the working environment and equipment used in construction. Therefore, high-altitude work equipment has received more and more attention, with continuous development and innovation in lifting and lowering and has been trusted and used by customers.There are many types of mobile elevator products, which can be roughly divided into: traction mobile elevator, self-propelled mobile elevator, manual mobile elevator, mobile elevator, etc. Mobile elevators have high stability in terms of mobility convenience, wide operating platforms, and high load-bearing capacity, making high-altitude operations more extensive and allowing multiple people to work simultaneously. Mobile elevators are widely used in industries such as factories, property management units, store decoration, architecture, decoration, venue layout, conference centers, etc.Furthermore, it is necessary to raise and lower the elevator several times at regular intervals to ensure that the hydraulic oil inside and the grease on the components are not misaligned due to prolonged immobility. It is also important to pay attention to the operation of the components to be observed. If the temperature is relatively low, it is necessary to frequently check the hydraulic oil of the elevator. If it is abnormal, otherwise oxidation and deterioration may occur and cause damage to the elevator. Specializing in product and renewable resource business, including mobile elevator manufacturersTihei,Equipped with a manual descent valve for emergency descent in case of power outage.To reduce noise, increase the clearance inside the platform, and also make the transmission more stable and the mechanism vibration less.Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.