CarmenCitySpecial wood floor brand for floor heatingWhat are the operating steps

709HP180518493   ·  2023-03-06 03:27:54   ·   Building materials

Small blisters can not be repaired after damage, and the upper foot is weak. The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies.CarmenCity,Two wood species positioning.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one) apply an appropriate amount of glue to the joint with a paint brush, check whether there are bubbles and whether they are flat.If there are bubbles and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Paiania,Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally,CarmenCityWhat is the thickness of wood floor, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, the installation will cause some floors and keel to hang, heat conduction is fast.Compared with wood flooring, first, wood flooring is more environmentally friendly, durable and has a long service life. Wood flooring is processed from natural wood, which is more environmentally friendly than artificial floor leather, and the service life of wood flooring is up to years.Second,CarmenCityAnticorrosive wood floor, the decorative effect is not as real and natural as the wooden floor. The wooden floor is hard and soft, and it is not easy to dust, giving people a high-level decoration effect and a sense of solemnity unmatched by other materials.Third: wood flooring is more precious than floor leather. Because it is derived from natural forest resources, it has a certain artistic value after precision processing, which brings more choices for home decoration.Brand introduction of floor leather


CarmenCitySpecial wood floor brand for floor heatingWhat are the operating steps



If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it.SPC floor does not use strong glue in the production process, so there is no indoor formaldehyde, benzene and other harmful substances. The real indoor formaldehyde low-carbon environmental protection floor has no damage to the body.Again,CarmenCityHow about composite wood floor, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).Product survey, About strengthening the floor. Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.Prepare the floor for hardwood installation


CarmenCitySpecial wood floor brand for floor heatingWhat are the operating steps



Finally, look at the priceService first,How to prevent cracks in wooden floors.Moreover, families with laminate floors should also pay attention to the removal methods of daily indoor formaldehyde.The usual practices are: Open windows for ventilation to let the polluted air spread at any time; Place green plants in the house to let the plants absorb formaldehyde; Use a purifier, such as anion, to filter formaldehyde; Use chemical collectors, such as formaldehyde collectors, to neutralize formaldehyde.Using these methods, you can minimize the formaldehyde content in your room.Let&#;s look at environmental protection first. Produce gene mutation effect.CarmenCity,The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the material will not be very expensive the foot feels comfortable, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today, we will discuss why the wood floor cracks.The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the foot feels comfortable, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use there will be a series of problems with wood flooring.Floor cracking is a common method.Today, we will discuss why the wood floor cracks.The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, no waterproof wooden floor.

4 Replies   |  until 2023-03-06 03:27:54 | 119 Views

Purchase, sale and storage of agricultural and sideline products 2023-03-06 10:59:51 support  0 | be opposed to  0

CarmenCitySpecial wood floor brand for floor heating It can be said to be top-notch, and the details are perfect.

agricultural tourism 2023-03-06 11:22:47 support  0 | be opposed to  0

CarmenCitySpecial wood floor brand for floor heatingVery good, very supportive, very good quality, exactly the same as described by the seller, and the price is cheap

DMC Molded Products 2023-03-06 11:45:42 support  0 | be opposed to  0

The manager is nice! CarmenCitySpecial wood floor brand for floor heating is also real.

Cinema equipment 2023-03-06 11:02:49 support  0 | be opposed to  0

The boss is so kind, he really knows his job well. Under your guidance, I will soon become an expert! The seller's service is really attentive. Bring colleagues together in the future. Very good CarmenCitySpecial wood floor brand for floor heating. Thank you.
Log inContent can only be published later